Alloy Steel Bars

Product Details:

Other possible products of 10CrMo9-10 are as follows:

10CrMo9-10 Rods, 10CrMo9-10 Blooms, 10CrMo9-10 Billets, 10CrMo9-10 Bars, 10CrMo9-10 Round Bars, 10CrMo9-10 Flat Bars, 10CrMo9-10 Round Corner Square Bars, 10CrMo9-10 RCS Bars, 10CrMo9-10 Straight Corner Square Bars, 10CrMo9-10 SCS Bars, 10CrMo9-10 Square Bars, 10CrMo9-10 Rectangular Bars, 10CrMo9-10 Hexagonal Bars, 10CrMo9-10 Forged Bars, 10CrMo9-10 Rolled Bars, 10CrMo9-10 Black Bars, 10CrMo9-10 Bright Bars, 10CrMo9-10 Proof Machined Bars, 10CrMo9-10 Hollow Bars, 10CrMo9-10 Normalized Bars, 10CrMo9-10 Annealed Bars, 10CrMo9-10 Hardened (Quenched) Tempered Bars, 10CrMo9-10 Blocks, 10CrMo9-10 Slabs, 10CrMo9-10 Circles, 10CrMo9-10 Patta, 10CrMo9-10 Flanges, 10CrMo9-10 Slip-On Flanges, 10CrMo9-10 Weld Neck Flanges, 10CrMo9-10 Blind Flanges, 10CrMo9-10 Socket Weld Flanges, 10CrMo9-10 Threaded Flanges, 10CrMo9-10 Lap Joint Flanges, 10CrMo9-10 Long Welding Neck Flanges, 10CrMo9-10 Plate Flanges, 10CrMo9-10 Raised Face Flanges, 10CrMo9-10 Flat Face Flanges, 10CrMo9-10 Ring Type Joint Flanges, 10CrMo9-10 RF Flanges, 10CrMo9-10 FF Flanges, 10CrMo9-10 RTJ Flanges, 10CrMo9-10 Plates, 10CrMo9-10 Sheets, 10CrMo9-10 Coils, 10CrMo9-10 Patti, 10CrMo9-10 Custom Profiles, 10CrMo9-10 Plate Shapes, 10CrMo9-10 Fitting, 10CrMo9-10 Elbow, 10CrMo9-10 45 Degree Elbow, 10CrMo9-10 90 Degree Elbow, 10CrMo9-10 180 Degree Elbow, 10CrMo9-10 Reducer, 10CrMo9-10 Eccentric Reducer, 10CrMo9-10 Concentric Reducer, 10CrMo9-10 Sleeve, 10CrMo9-10 Union, 10CrMo9-10 Forgings, 10CrMo9-10 Machined Parts, 10CrMo9-10 Tube, 10CrMo9-10 Tubing, 10CrMo9-10 Pipes

 

Product Details:

DIN 1.7335 Alloy Steel Bars / 1.7335 Round Bars / 1.7335 Bars can be avail as rolled, forged in annealed condition with black or bright (peeled or proof machined) finish.
Size Specifications: Can offer DIN 1.7335 Alloy Steel Bars / 1.7335 Round Bars / 1.7335 Bars in size range of 3mm upto 400mm in diameter.
Chemical composition of DIN 1.7335 Alloy Steel Bars/ 1.7335 Round Bars / 1.7335 Bars:
Grade
C
Mn
P
S
Si
Cr
Mo
1.7335
0.05-0.15
0.30-0.61
0.025 max
0.025 max
0.50 max
0.80-1.25
0.44-0.65
Heat Treatment Conditions of DIN 1.7335 Alloy Steel Bars / 1.7335 Round Bars / 1.7335 Bars:
+A Soft annealed
+AC Annealed to achieve spheroidization of the carbides
+AR As rolled
+AT Solution annealed
+C Cold drawn / hard
+CR Cold rolled
+N Normalized
+NT Normalized and tempered
+P Precipitation hardened
+PE Peeled
+QA Air quenched and tempered
+QL Liquid quenched and tempered
+QT Quenched and tempered
+S Treated to improve shearability
+SH As rolled and turned
+SR Cold drawn and stress relieved
+T Tempered
Client can buy smaller quantities of DIN 1.7335 Alloy Steel Bars / 1.7335 Round Bars / 1.7335 Bars online from our associated manufacturing unit in India at premium cost.
If any requirements for DIN 1.7335 Alloy Steel Bars / 1.7335 Round Bars / 1.7335 Bars kindlydo contact us.

Product Details:

Size Specifications: Can offer 4130 Alloy Steel Bars / 4130 Round Bars / 4130 Flat Bars in size range of 10mm upto 1000mm in diameter.

Equivalent grades steel number of SAE / AISI 4130 Alloy Steel Bars / 4130 Round Bars / 4130 Flat Bars:

EU EN: 25CrMo4

USA AISI: SAE 4130

Germany DIN,WNr: 1.7218, 25CrMo4

Japan JIS: SCM420, SCM430

France AFNOR: 25CD4

England BS: 708A25, 708M25, CFS10

Italy UNI: 25CrMo4

China GB: 30CrMo

Sweden SS: 2225

Czechia CSN: 15130

Finland SFS: 25CrMo4

Russia GOST: 20KHM, 30KHM, 30KHMA

Inter ISO: 25CrMo4

AMS 6348, 6350, 6351, 6360, 6361, 6362, 6370, 6371, 6373, 6374, 6528, 7496

ASTM A29, A322, A331, A506, A507, A513, A519, A646, A752, A829

MIL S-18729, S-6758

SAE J1397, J404, J412

JIS SCCrM1, SCM2

Chemical composition of SAE / AISI 4130 Alloy Steel Bars / 4130 Round Bars / 4130 Flat Bars:

Product Details:

DIN 1.7218 Alloy Steel Bars / 1.7218 Round Bars / 1.7218 Bar can be avail as rolled, forged in annealed condition with black or bright (peeled or proof machined) finish.
 
Size Specifications: Can offer DIN 1.7218 Alloy Steel Bars / 1.7218 Round Bars / 1.7218 Bar in size range of 10mm upto 1000mm in diameter.
 
Chemical composition of DIN 1.7218 Alloy Steel Bars / 1.7218 Round Bars / 1.7218 Bar:
Element: Percentage
Chromium, Cr: 0.80 – 1.10
Manganese, Mn: 0.40 – 0.60
Carbon, C: 0.280 – 0.330
Silicon, Si: 0.15 – 0.30
Molybdenum, Mo: 0.15 – 0.25
Sulfur, S: 0.040 max
Phosphorous, P: 0.035 max

Product Details:

We can offer AISI 4140 Alloy Steel Bars / SAE 4140 Round Bars / AISI 4140 Flat Bars. 4140 Alloy Steel is cold drawn annealed steel of relatively high hardenability with its chromium content providing good hardness penetration, and the molybdenum imparts uniformity of hardness and high strength. 4140 Alloy Steel responds well to heat-treatment and is relatively easy to machine in the annealed condition. 4140 Alloy Steel has good strength and wear resistance, excellent toughness, coupled with good ductility, and the ability to resist stress at elevated temperatures. 4140 Alloy Steel Bars / 4140 Round Bars / 4140 Flat Bars can be avail as rolled, forged in annealed condition with black or bright (peeled or proof machined) finish. Size Specifications: Can offer 4140 Alloy Steel Bars / 4140 Round Bars / 4140 Flat Bars in size range of 10mm upto 850mm in diameter. Chemical composition of 4140 Alloy Steel Bars / 4140 Round Bars / 4140 Flat Bars: Element: Percentage Carbon, C: 0.380 - 0.430 % Chromium, Cr: 0.80 - 1.10 % Manganese, Mn: 0.75 - 1.0 % Molybdenum, Mo: 0.15 - 0.25 % Phosphorous, P: ≤ 0.035 % Silicon, Si: 0.15 - 0.30 % Sulfur, S: ≤ 0.040 % Other possible products of AISI 4140 are as follows: AISI 4140 Rods, AISI 4140 Blooms, AISI 4140 Billets, AISI 4140 Bars, AISI 4140 Round Bars, AISI 4140 Flat Bars, AISI 4140 Round Corner Square Bars, AISI 4140 RCS Bars, AISI 4140 Straight Corner Square Bars, AISI 4140 SCS Bars, AISI 4140 Square Bars, AISI 4140 Rectangular Bars, AISI 4140 Hexagonal Bars, AISI 4140 Forged Bars, AISI 4140 Rolled Bars, AISI 4140 Black Bars, AISI 4140 Bright Bars, AISI 4140 Proof Machined Bars, AISI 4140 Hollow Bars, AISI 4140 Normalized Bars, AISI 4140 Annealed Bars, AISI 4140 Hardened (Quenched) Tempered Bars, AISI 4140 Blocks, AISI 4140 Slabs, AISI 4140 Circles, AISI 4140 Patta, AISI 4140 Forgings, AISI 4140 Machined Parts, AISI 4140 Shafts, AISI 4140 Tube, AISI 4140 Tubing, AISI 4140 Pipes, AISI 4140 Seamless Tube, AISI 4140 Seamless Tubing, AISI 4140 Seamless Pipes. Client can buy smaller quantities of 4140 Alloy Steel Bars / 4140 Round Bars / 4140 Flat Bars online from our associated manufacturing unit in India at premium cost. If any requirements for 4140 Alloy Steel Bars / 4140 Round Bars / 4140 Flat Bars kindly do contact us.

Product Details:

ASTM A213 T22, A335 P22, A182 F22, A387Gr.22

EU EN: 10CrMo9-10

USA: A387Gr.22

Germany DIN,WNr: 1.7380, Gr.P22

Japan JIS: 10CrMo9-10

France AFNOR: SCMV4

England BS: 10CD9-10, 12CD9-10

Italy UNI: 622, 622Gr.31

Spain UNE: 10CrMo9-10, 12CrMo9-10

China GB: 12CrMo

Sweden SS: 2218

Poland PN: 10H2M

Czechia CSN: 15313

Austria ONORM: 10CrMo9-10KW

Russia GOST: 10KH2M

Inter ISO: F34, P34, TS34

 

DIN 1.7380 Alloy Steel Bars / 1.7380 Round Bars / 1.7380 Bars can be avail as rolled, forged in annealed condition with black or bright (peeled or proof machined) finish.

 

Size Specifications: Can offer DIN 1.7380 Alloy Steel Bars / 1.7380 Round Bars / 1.7380 Bars in size range of 3mm upto 400mm in diameter.

 

Product Details:

ize Specifications: Can offer 16Mo3 Alloy Steel Bars / 16Mo3 Round Bars / 16Mo3 Bars in size range of 3mm upto 400mm in diameter.
 
Chemical composition of 16Mo3 Alloy Steel Bars / 16Mo3 Round Bars / 16Mo3 Bars:
Element: Percentage
C: 0.16 max
Mo: 0.30 max
Cu: 0.30 max
Si: 0.40 max
Mn: 0.60 max

Product Details:

Equivalent grades of DIN 1.5415 Alloy Steel Bars / 1.5415 Round Bars / 1.5415 Bars:

ASTM A213 T1, A335 P1, A182 F1, A387Gr.1

EU EN: 16Mo3

USA AISI: A204Gr.A, A204Gr.B

Germany DIN,WNr: 1.5415, 15Mo3, 16Mo3

Japan JIS: STBA12

France AFNOR: 15D3

England BS: 1503-243B, 240, 243

Italy UNI: 15Mo3, 16Mo3

Spain UNE: 16Mo3

Sweden SS: 2912

Poland PN: 16M

Czechia CSN: 15020

Austria ONORM: 15Mo3KW

Inter ISO: F26, P26, TS26

 

DIN 1.5415 Alloy Steel Bars / 1.5415 Round Bars / 1.5415 Bars can be avail as rolled, forged in annealed, quenched & tempered condition with black or bright (peeled or proof machined) finish.

 

Size Specifications: Can offer DIN 1.5415 Alloy Steel Bars / 1.5415 Round Bars / 1.5415 Bars in size range of 25mm upto 150mm in diameter.

Product Details:

quivalent grades of X12CrMo5 Alloy Steel Bars / X12CrMo5 Round Bars / X12CrMo5 Bars:
ASTM A335 P5, ASTM A182 F5, ASTM A213 T5, A387Gr.5
EU EN: 1.7362, 5CrMo16, X12CrMo5
USA AISI: 501, 502, K41545, S50100, S50200, T12005, T51605
Germany DIN,WNr: 1.7362, 12CrMo19-5, T5, X12CrMo5
Japan JIS: SFVAB5A, STBA25, STC48, STFA25, STPA25
France AFNOR: 710CD5-05, Z15CD5-05, Z20CD5
Italy UNI: A16CrMo25-5KG, A16CrMo25-5KW
China GB: 10MoCr50
Hungary MSZ: 12CrMo20-5
Poland PN: H5M
Czechia CSN: 17102
Romania STAS: 10MoCr50